A package contains 20 self-adhesive gel nail polish layers.

Professional results regardless of color and pattern.

No smudges or long drying times. In only 3 minutes, your hand gets a perfected look, as beautiful nails you get on the salon.

For the best possible durability (up to 3 weeks) and results, apply the Layer after description and use our elegant UV LED lamp in 45 sec.

Layer hardens under the lamp, increases its durability and gets a beautiful luster.

When the packaging has been broken, remember to put back the layers left in the protective plastic in which they are stored upon delivery. Then seal the protective plastic with the tape that comes with the package. With open packaging, our layers last up to 6 months if they are protected in the protective plastic and are well sealed.

IMPORTANT! Should not be exposed to sunlight before application.

Acrylates Copolymer, Polyacrylic Acid, PPG-3 Glyceryl Ether Triacrylate, Isopropyl Thioxanthone, +/- (Red CI 15850:2, Red CI 15850:1, Yellow CI 19140, Yellow CI 47005, Blue CI 42045, Black Ci 77499, Titanium Dioxide CI 77891, Aluminum CI 77000, Bismuth Chloride Oxide CI 77163, Mica CI77004), Isobutylphenoxy Epoxy Resin, Polyethylene, Isoterephthalate, Fragrance.

How to apply your Layers

Step 1. 

PREPARATION 

Always start by washing your hands carefully. It removes dirt and potential cosmetic residue. Remove any cuticle remnants from the nail bed and push back your cuticles. Let your nails dry properly to ensure that there isn’t any moisture left under the nail/cuticle. 

Why is it important? Your Layers will stick better to a clean, dry, and smooth nail bed. The result will be more even, and your Layers will stay immaculate longer.

Step 2. 

CHOOSE 

Remove the protective plastic from your sheet of Layers. Choose the right size Layer by comparing the different Layers to your nails - you want to pick a size that is as close to the size of the nail as possible. Are you between sizes? Choose the smaller of the two, and stretch it sideways across the nail bed - it gives a cleaner finish and a more durable result. 

Step 3.

PLACE 

Apply the Layer to your nail, place it gently on the nail bed, start at one side, close to the cuticle, and press the Layer toward the other side. To achieve the best result, apply the Layer carefully on your nail, so it is placed on the nail bed and not on the skin, and make sure that it fits snug too, but not on your cuticle - the Layers are soft and can be stretched for maximum coverage. 

Step 4. 

ADJUST

Pull the Layer over the tip of the nail, almost like pulling a fitted sheet over a mattress. Use a nail/fingertip or a nail file to press the Layer around the front edge of the nail. Remove the excess by pinching it off and/or using a nail file. 

Step 5. 

MAKE IT LAST 

Place your nails under the UV LED lamp, one hand at a time. Push the button and keep your nails under the UV light until the light goes out after 60 seconds. The light from the lamp hardens the material. That increases the durability of the manicure and gives the nails a glossy, lustrous finish. Make sure you place all nails under the lamp. 

Step 6. 

YOU NAILED IT

Your manicure is too good not to share with the rest of the world! Take a picture of your nails and post it on social media. Don’t forget to tag @lovenlayer, #lovenlayer, and of course #younailedit

Step 7.

REMOVAL

Time to switch color or pattern? This is how you remove your old Layers. Start at the bottom by the cuticle. Slowly and carefully peel the Layer off. If you find it difficult to remove the Layer, use some nail oil underneath it and wait for a minute. Then peel it off. Wash your hands carefully with soap and water. Before putting on a fresh set of Layers, remove any cuticle remnants from the nail bed and push back your cuticles. Make sure your nails are completely dry to avoid that there is any moisture left under the nail bed or cuticle. Make sure that the nail bed is softer than it usually is.